Static Route; Sta Tic Ro Ute; Overview; Ip Static Route Screen - ZyXEL Communications NBG-418N v2 User Manual

12.1 O ve rvie w
This chapter shows you how to configure static routes for your NBG-418N v2.
The NBG-418N v2 usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the NBG-418N v2 send data to devices not reachable through the default
gateway, use static routes.
For example, the next figure shows a computer (
NBG-418N v2 routes most traffic from
You create one static route to connect to services offered by your ISP behind router
another static route to communicate with a separate network behind a router
LAN.
Fig ure 82
Example of Static Routing Topology
A
R3
12.2 IP Sta tic Ro ute Sc re e n
Ne two rk > Sta tic Ro ute
Click
A
to the Internet through the NBG-418N v2's default gateway (
LAN
WAN

Sta tic Ro ute

to open the
NBG-418N v2 User's Guide
114
C
HA PTER
Sta tic Ro ute
A
) connected to the NBG-418N v2's LAN interface. The
R1
R2
screen.
1 2
R1
).
R2 . You create
R3 connected to the