Chapter 24 Tools
24.2 The Firmware Screen
Click Maintenance > Tools to open the Firmware screen. Follow the
instructions in this screen to upload firmware to your CellPipe 7130 RG. The
upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two
minutes. After a successful upload, the system will reboot.
Do NOT turn off the CellPipe 7130 RG while firmware upload is in
progress!
Figure 128 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Table 95 Maintenance > Tools > Firmware
LABEL
Current
Firmware
Version
File Path
Browse...
Upload
276
DESCRIPTION
This is the present Firmware version and the date created.
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload
them.
Click Upload to begin the upload process. This process may take up to
two minutes.
CellPipe 7130 RG User's Guide