Configuring Static Route For Routing To Another Network - ZyXEL Communications PMG5317-T20A User Manual

The screen shows you the list of available media files in the USB storage device. Select the file you
3
want to open and push the Play button in the remote control.
Tutorial: Media Sharing using DMA-2500 (2)
4.8 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the GPON Device's LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the GPON Device's LAN. R connects to two
networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the GPON
Device's WAN default gateway by default. In this case, B will never receive the traffic.
N1
Chapter 4 Tutorials
A
PMG5317-T20A User's Guide
R
B
55
N2