The Tr-064 Screen - ZyXEL Communications CellPipe 7130 RG User Manual

Table 78 TR-069 (continued)
LABEL
Connection
Request User
Name
Connection
Request
Password
Connection
Request URL
Apply
Cancel

18.3 The TR-064 Screen

TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum.
TR-064 is built on top of UPnP. It allows the users to use a TR-064 compliant CPE
management application on their computers from the LAN to discover the CPE and
configure user-specific parameters, such as the username and password.
Click Advanced > Remote MGMT > TR064 to open the following screen.
Figure 97 TR-064
The following table describes the fields in this screen.
Table 79 TR-064
LABEL
Enanble TR064
Apply
CellPipe 7130 RG User's Guide
DESCRIPTION
Enter the connection request user name.
When the ACS makes a connection request to the CellPipe 7130 RG,
this user name is used to authenticate the ACS.
Enter the connection request password.
When the ACS makes a connection request to the CellPipe 7130 RG,
this password is used to authenticate the ACS.
This shows the connection request URL.
The ACS can use this URL to make a connection request to the CellPipe
7130 RG.
Click this button to save your changes back to the CellPipe 7130 RG.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select the check box to activate management via TR-064 on the LAN.
Click this button to save your changes back to the CellPipe 7130 RG.
Chapter 18 Remote Management
241