Table of Contents
Advertisement
PPPoE or PPPoA
This screen displays when you select PPP over Ethernet (PPPoE) in the WAN
Service Configuration screen or set the DSL link type to PPPoA for the ATM
interface and configure a WAN connection using the ATM interface.
Figure 26 Network > WAN > Services > Add/Edit Service Type 2: PPPoE or PPPoA
The following table describes the labels in this screen.
Table 21 Network > WAN > Services > Add/Edit Service Type 2: PPPoE or PPPoA
LABEL
PPP User Name
PPP Password
PPPoE Service
Name
CellPipe 7130 RG User's Guide
DESCRIPTION
Enter the user name exactly as your ISP assigned. If assigned a name
in the form user@domain where domain identifies a service name,
then enter both components exactly as given.
Enter the password associated with the user name above.
Type the name of your PPPoE service here.
This field is not available for a PPPoA connection.
Chapter 5 WAN Setup
115
Advertisement
Table of Contents
Troubleshooting
