Service Type - ZyXEL Communications CellPipe 7130 RG User Manual

The following table describes the labels in this screen.
Table 19 Network > WAN > Services: Add/Edit
LABEL
Select a layer 2
interface for this
service
Back
Next

5.6.1.2 Service Type

If you set the DSL link type to PPPoA or IPoA for the ATM interface and configure
a WAN connection using the ATM interface, you only need to configure the Enter
Service Description field in this screen.
Figure 24 Network > WAN > Services > Add/Edit: Service Type
Figure 25 Network > WAN > Services > Add/Edit: Service Type - PPPoA or IPoA
CellPipe 7130 RG User's Guide
DESCRIPTION
Select ptm0 to use the DSL port as the WAN port and use the VDSL
technology for data transmission.
Select atmx (where x starts from 0 and is the index number of ATM
layer-2 interfaces using different VPI and/or VCI values) to use the
DSL port as the WAN port and use the ADSL technology for data
transmission.
Select eth4 if you want to use the Ethernet WAN port as the WAN
port.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 5 WAN Setup
113