ZyXEL Communications CellPipe 7130 RG User Manual page 73

are only allowed to access the Doom server on Friday to Saturday, from 1PM to
8PM.
Tutorial: NAT Port Forwarding Setup
D=192.168.1.34
Thomas may set up the port settings by configuring the port settings for the Doom
server computer (see
Click Network > NAT to open the Port Forwarding screen. Enter the following
1
values:
Service Name
WAN Interface
Server IP Address
External Port/s
Protocol
Start/Stop Time
Select Days
CellPipe 7130 RG User's Guide
LAN
port 666
Section 8.3 on page 172
Select User Defined.
In the screen that opens, enter Doom_Server as the Service
Name.
Select the WAN interface through which the Doom service is
forwarded. This is the default interface for this example, which is
ipoe_eth4_1.
Enter the IP address of the Doom server. This is 192.168.1.34
for this example.
Enter 666 as the Start and End port.
Select TCP/UDP. This should be the protocol supported by the
Doom server.
Enter 13:00 ~ 20:00 in the time fields and select Friday ~
Saturday in the day field.
Chapter 2 Tutorials
WAN
A
for more information).
73