Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 39 Network > Wireless LAN > WDS
LABEL
WDS
Operating Mode Select the operating mode for your CellPipe 7130 RG.
Bridge Restrict
Remote Bridges
MAC Address
SSID
BSSID
Refresh
Apply
CellPipe 7130 RG User's Guide
DESCRIPTION
•
Access Point + Bridge - The CellPipe 7130 RG functions as a
bridge and access point simultaneously.
•
Wireless Bridge - The CellPipe 7130 RG acts as a wireless network
bridge and establishes wireless links with other APs. In this mode,
clients cannot connect to the CellPipe 7130 RG wirelessly.
You need to know the MAC address of the peer device, which must be of
the same model and also WDS-enabled. The CellPipe 7130 RG can
establish up to four wireless links with other APs.
This field is available only when you set operating mode to Access
Point + Bridge.
Select Enabled to turn on WDS and enter the peer device's MAC
address manually in the table below.
Select Enabled(Scan) to turn on WDS, search and display the
available APs within range in the table below.
Enter the MAC address of the peer device that your CellPipe 7130 RG
wants to make a bridge connection with.
You can connect to up to 4 peer devices.
This field is available only when you select Enabled(Scan) in the
Bridge Restrict field.
Select the check box and click Apply to have the CellPipe 7130 RG
establish a wireless link with the selected wireless device.
This field is available only when you select Enabled(Scan) in the
Bridge Restrict field.
This shows the SSID of the available wireless device within range.
This field is available only when you select Enabled(Scan) in the
Bridge Restrict field.
This shows the MAC address of the available wireless device within
range.
Click Refresh to update the Remote Bridges MAC Address table
when Bridge Restrict is set to Enabled(Scan).
Click Apply to save your changes to CellPipe 7130 RG.
Chapter 7 Wireless LAN
157
Advertisement
Table of Contents
Troubleshooting
