ZyXEL Communications CellPipe 7130 RG User Manual page 228

Chapter 16 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 72 QoS Class Configuration
LABEL
Class
Configuration
Active
Class Name
Classification
Order
Forward to
Interface
DSCP Mark
802.1p Mark
VLAN ID Tag
To Queue
Criteria Configuration
Use the following fields to configure the criteria for traffic classification.
Basic
From Interface
228
DESCRIPTION
Select to enable or disable this classifier.
Enter a descriptive name of up to 15 printable English keyboard
characters, including spaces.
Select an existing number to set the classifier's order. The order takes
effect after clicking Apply and can be viewed in
Setup
.
Select Last to put this rule in the end of the classifier list.
Select a WAN interface through which traffic of this class will be
forwarded out. If you select Unchange, the CellPipe 7130 RG forward
traffic of this class according to the default routing table.
This field is available only when you select the Ether Type check box.
If you select Mark, enter a DSCP value with which the CellPipe 7130
RG replaces the DSCP field in the packets.
If you select Unchange, the CellPipe 7130 RG keep the DSCP field in
the packets.
Select a priority level with which the CellPipe 7130 RG replaces the
IEEE 802.1p priority field in the packets.
If you select Unchange, the CellPipe 7130 RG keep the 802.1p
priority field in the packets.
If you select Remark, enter a VLAN ID number (between 1 and 4095)
with which the CellPipe 7130 RG replaces the VLAN ID of the frames.
If you select Remove, the CellPipe 7130 RG deletes the VLAN ID of
the frames before forwarding them out.
If you select Add, the CellPipe 7130 RG treat all matched traffic
untagged and add a second VLAN ID.
If you select Unchange, the CellPipe 7130 RG keep the VLAN ID in
the packets.
Select a queue that applies to this class.
You should have configured a queue in the Queue Setup screen
already.
Select from which Ethernet port or wireless interface traffic of this
class should come.
QoS > Class
CellPipe 7130 RG User's Guide