C
H A P T E R
2.1 Overview
This chapter describes:
•
How to Set up a Wireless Network on page
•
HomePNA Example Setup on page 39
•
How to Use ATM QoS with Multiple PVCs on page
•
How to Allow Out-of-band Remote Management from the WAN on page
•
Using the Media Server Feature on page 65
•
Using the File Sharing Feature on page
•
Setting Up NAT Port Forwarding on page
•
Configuring Static Route for Routing to Another Network on page 74
•
Configuring QoS Queue and Class Setup on page 77
•
Access the CellPipe 7130 RG Using DDNS on page 80
Note: The tutorials featured in this chapter require a basic understanding of
connecting to and using the Web Configurator on your CellPipe 7130 RG. For
details, see the included Quick Start Guide. For field descriptions of individual
screens, see the related technical reference in this User's Guide.
2.2 How to Set up a Wireless Network
This tutorial gives you examples of how to set up an access point (AP) and
wireless client for wireless communication using the following parameters. The
wireless clients can access the Internet through an AP wirelessly.
The CellPipe 7130 RG's AP function is enabled by default. The wireless settings,
such as the SSID and pre-shared key, are already configured in the CellPipe 7130
RG. Use this tutorial if you want to use wireless settings other than the default
values.
CellPipe 7130 RG User's Guide
Tutorials
29.
40.
71.
72..
2
53.
29