Internet Access - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 26 Troubleshooting
If this does not work, you have to reset the device to its factory defaults. See
3
Section 26.1 on page
I cannot Telnet to the CellPipe 7130 RG.
See the troubleshooting suggestions for
(or other screens) in the web configurator.
browser.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to
upload new firmware.
See the troubleshooting suggestions for
(or other screens) in the web configurator.
browser.
I cannot access the CellPipe 7130 RG again after configuring a new interface
group.
Make sure your computer is connected to a LAN port in the default group.
Otherwise, you need to use the CellPipe 7130 RG's LAN IP address for the new
group to access the CellPipe 7130 RG again.

26.3 Internet Access

I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as
1
expected. See the Quick Start Guide and
Make sure you entered your ISP account information correctly in the WAN screens.
2
These fields are case-sensitive, so make sure [Caps Lock] is not on.
292
289.
I cannot see or access the Login screen
Ignore the suggestions about your
I cannot see or access the Login screen
Ignore the suggestions about your
Section 1.6 on page 26.
CellPipe 7130 RG User's Guide