ZyXEL Communications CellPipe 7130 RG User Manual page 42

Chapter 2 Tutorials
Enter the VPI and VCI values (0 and 33 in this example) for PVC 1.
3
Select CBR in the Service Category field and set the Peak Cell Rate as 943
(divide the bandwidth 400000 bps by 424). Click Apply to save the changes and
go back to the Connect screen.
Click Add to configure another PVC.
4
Enter the VPI and VCI values (0 and 34 in this example) for PVC 2.
5
Select Non Realtime VBR in the Service Category field. Set the Peak Cell
Rate as 1415 (divide the bandwidth 600000 bps by 424) and set both the
Sustainable Cell Rate and Maximum Burst Size as 1414 (which is less than
the peak cell rate).
42
CellPipe 7130 RG User's Guide