ZyXEL Communications CellPipe 7130 RG User Manual page 75

network), the traffic is sent to the CellPipe 7130 RG's WAN default gateway by
default. In this case, B will never receive the traffic.
N1
You need to specify a static routing rule on the CellPipe 7130 RG to specify R as
the router in charge of forwarding traffic to N2. In this case, the CellPipe 7130 RG
routes traffic from A to R and then R routes the traffic to B.This tutorial uses the
following example IP settings:
N1
Table 6 IP Settings in this Tutorial
DEVICE / COMPUTER
The CellPipe 7130 RG's WAN
The CellPipe 7130 RG's LAN
A
R's N1
CellPipe 7130 RG User's Guide
A
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
Chapter 2 Tutorials
R
N2
B
R
N2
B
75