Table of Contents
Advertisement
Chapter 5 WAN Setup
Table 22 Network > WAN > Services > Add/Edit Service Type 2: IPoE
LABEL
DUID Type
DUID
Identifier
Enable DHCP
Option 125
Manufacturer
OUI
Product Class
Model Name
Serial Number
Use the following
Static IP address
WAN IP
Address
WAN Subnet
Mask
WAN gateway
IP Address
Back
Next
IPoA
This screen displays only when you set the DSL link type to IPoA for the ATM
interface and configure a WAN connection using the ATM interface.
Figure 28 Network > WAN > Services > Add/Edit Service Type 2: IPoA
118
DESCRIPTION
Select Other to enter any string that identifies the CellPipe 7130 RG
in the DUID field.
Select DUID-LL (DUID Based on Link-layer Address) to enter the
CellPipe 7130 RG's hardware address, that is the MAC address in the
DUID field.
Select DUID-EN (DUID Assigned by Vendor Based on Enterprise
Number) to enter the vendor's registered private enterprise number.
Enter the DHCP Unique Identifier (DUID) of the CellPipe 7130 RG.
Enter a unique identifier assigned by the vendor.
This field is available when you select DUID-EN in the DUID Type
field.
Select this to add vendor specific information to DHCP requests that
the CellPipe 7130 RG sends to a DHCP server when getting a WAN IP
address.
Specify the vendor's OUI (Organization Unique Identifier). It is usually
the first three bytes of the MAC address.
Enter the product class of the CellPipe 7130 RG.
Enter the model name of the CellPipe 7130 RG.
Enter the serial number of the CellPipe 7130 RG.
Select this if you have a static IP address.
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Enter the gateway IP address provided by your ISP.
Click this button to return to the previous screen.
Click this button to continue.
CellPipe 7130 RG User's Guide
Advertisement
Table of Contents
Troubleshooting
