Table of Contents
Advertisement
To use this feature, you have to apply for DDNS service at www.dyndns.org.
This tutorial shows you how to:
•
Registering a DDNS Account on www.dyndns.org
•
Configuring DDNS on Your CellPipe 7130 RG
•
Testing the DDNS Setting
Note: If you have a private WAN IP address, then you cannot use DDNS.
2.11.1 Registering a DDNS Account on www.dyndns.org
Open a browser and type http://www.dyndns.org.
1
Apply for a user account. This tutorial uses UserName1 and 12345 as the
2
username and password.
Log into www.dyndns.org using your account.
3
Add a new DDNS host name. This tutorial uses the following settings as an
4
example.
• Hostname: yourrouter.dyndns.org
• Service Type: Host with IP address
• IP Address: Enter the WAN IP address that your CellPipe 7130 RG is currently
using. You can find the IP address on the CellPipe 7130 RG's Web Configurator
Home page.
Then you will need to configure the same account and host name on the CellPipe
7130 RG later.
2.11.2 Configuring DDNS on Your CellPipe 7130 RG
Configure the following settings in the Advanced > Dynamic DNS screen.
• Select Active Dynamic DNS.
• Select Dynamic DNS for the DDNS type.
• Type yourrouter.dyndns.org in the Host Name field.
CellPipe 7130 RG User's Guide
Chapter 2 Tutorials
81
Advertisement
Table of Contents
Troubleshooting
