Table of Contents
Advertisement
Table 10 Status > Route Info (continued)
LABEL
Interface
Close
4.2.3 WLAN Station List
Click Status > WLAN Station List to access this screen. Use this screen to view
the wireless stations that are currently associated to the CellPipe 7130 RG.
Figure 13 Status > WLAN Station List
The following table describes the labels in this screen.
Table 11 Status > WLAN Station List
LABEL
MAC
SSID
Interface
Close
Refresh
Interval
Set Interval
Stop
CellPipe 7130 RG User's Guide
DESCRIPTION
This indicates the name of the interface through which the route is
forwarded.
•
br0 indicates the LAN interface.
•
ptm0 indicates the VDSL WAN interface using IPoE or in bridge mode.
•
atmx (where x starts from 0 and is the index number of ATM layer-2
interfaces using different VPI and/or VCI values) indicates the ADSL
WAN interface using IPoE or in bridge mode.
•
pppoa1 indicates the ADSL WAN interface using PPPoA.
•
ipoa0 indicates the ADSL WAN interface using IPoA.
•
ppp0 indicates the WAN interface using PPPoE.
•
eth4 indicates the Ethernet WAN interface using IPoE.
Click this to close the window.
DESCRIPTION
This field shows the MAC (Media Access Control) address of an associated
wireless station.
This field shows the SSID to which the wireless station is connected.
This field shows the wireless interface to which the wireless station is
connected.
Click this to close the window.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Refresh
Interval field.
Click Stop to stop refreshing statistics.
Chapter 4 Status Screens
97
Advertisement
Table of Contents
Troubleshooting
