The Dmz Host Screen - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 8 Network Address Translation (NAT)
Table 44 Port Forwarding Edit (continued)
LABEL
Internal End
Port
Server IP
Address
Protocol
Time Start
(24H)
Time Stop
(24H)
Select Days
Back
Apply
Cancel

8.4 The DMZ Host Screen

In addition to the servers for specified services, NAT supports a default server IP
address. A default server receives packets from ports that are not specified in the
NAT Port Forwarding Setup screen.
Figure 60 NAT > DMZ Host
176
DESCRIPTION
Enter the last port of the translated port range.
Enter the inside IP address of the virtual server here.
Select the transport layer protocol supported by this virtual server.
Choices are TCP, UDP, or TCP/UDP.
Specify the hour and minute when the port forwarding schedule begins.
Hour - 0 - 23
Minute - 0 - 59
The time is in 24-hour format, for example 15:00 is 3:00 PM.
Specify the hour and minute when the port forwarding schedule stops.
Hour - 0 - 23
Minute - 0 - 59
The time is in 24-hour format, for example 15:00 is 3:00 PM.
Select each day of the week the recurring schedule is effective.
Click Back to return to the previous screen.
Click Apply to save your changes back to the CellPipe 7130 RG.
Click Cancel to begin configuring this screen afresh.
CellPipe 7130 RG User's Guide