ZyXEL Communications CellPipe 7130 RG User Manual page 108

Chapter 5 WAN Setup
You can configure and use multiple ATM Connect interfaces using different VPI
and/or VCI values. The screen varies depending on the interface type you select.
Figure 20 Network > WAN > Connect: Add/Edit DSL ATM
Figure 21 Network > WAN > Connect: Add/Edit: DSL PTM/Ethernet WAN
The following table describes the fields in this screen.
Table 17 Network > WAN > Connect: Add/Edit
LABEL
ATM PVC
Configuration
VPI
108
DESCRIPTION
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define
a virtual circuit. This section is available only when you configure an
ATM Connect interface.
The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
CellPipe 7130 RG User's Guide