The General Screen - ZyXEL Communications CellPipe 7130 RG User Manual

7.4 The General Screen

Note: If you are configuring the CellPipe 7130 RG from a computer connected to the
wireless LAN and you change the CellPipe 7130 RG's SSID or security
settings, you will lose your wireless connection when you press Apply to
confirm. You must then change the wireless settings of your computer to match
the CellPipe 7130 RG's new settings.
Click Network > Wireless LAN to open the General screen.
Figure 39 Network > Wireless LAN > General
The following table describes the labels in this screen.
Table 29 Network > Wireless LAN > General
LABEL
Active
Wireless LAN
Channel
Selection
CellPipe 7130 RG User's Guide
DESCRIPTION
Click the check box to activate wireless LAN.
Set the operating frequency/channel depending on your particular region.
Select a channel or use Auto to have the CellPipe 7130 RG automatically
determine a channel to use. If you are having problems with wireless
interference, changing the channel may help. Try to use a channel that is
as many channels away from any channels used by neighboring APs as
possible. The channel number which the CellPipe 7130 RG is currently
using then displays next to this field.
Chapter 7 Wireless LAN
143