ZyXEL Communications CellPipe 7130 RG User Manual page 76

Chapter 2 Tutorials
Table 6 IP Settings in this Tutorial
DEVICE / COMPUTER
R's N2
B
To configure a static route to route traffic from N1 to N2:
Click Advanced > Static Route. Click Add.
1
Configure the Static Route Setup screen using the following settings:
2
• Select Active.
• Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
• Select the Internet connection interface for this route, ipoe_0_0_33/atm0 in
this example.
• Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field.
Click Apply. The Advanced > Static Route screen should display the route you
just added.
Now B should be able to receive traffic from A. You may need to additionally
configure B's firewall settings to allow specific traffic to pass through.
76
IP ADDRESS
192.168.10.2
192.168.10.33
CellPipe 7130 RG User's Guide