Table of Contents
Advertisement
Figure 28 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the labels in this screen.
Table 13 Wireless > General: More Secure: WPA(2)-PSK
LABEL
Security Level
Security Mode
Generate
password
automatically
Password
more.../less
Encryption
Group Key
Update Timer
7.3 The Guest/More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the GPON
Device.
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
Chapter 7 Wireless
DESCRIPTION
Select More Secure to enable WPA(2)-PSK data encryption.
Select WPA-PSK, WPA2-PSK, or WPA/WPA2-PSK from the drop-down list box.
Select this option to have the GPON Device automatically generate a password. The
password field will not be configurable when you select this option.
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only
difference between the two is that WPA(2)-PSK uses a simple common password, instead of
user-specific credentials.
If you did not select Generate password automatically, you can manually type a pre-
shared key from 8 to 64 case-sensitive keyboard characters.
Click more... to show more fields in this section. Click less to hide them.
Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Group Key Update Timer is the rate at which the RADIUS server sends a new group
key out to all clients.
PMG5317-T20A User's Guide
88
Advertisement
Table of Contents
