The Guest / More Ap Screen - ZyXEL Communications VMG5313-B30A User Manual

Table 19 Wireless > General: More Secure: WPA(2)-PSK (continued)
LABEL
Encryption
Group Key
Update Timer

7.3 The Guest / More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the VMG.
Click Network Setting > Wireless > Guest / More AP. The following screen displays.
Figure 32 Network Setting > Wireless > Guest / More AP
The following table describes the labels in this screen.
Table 20 Network Setting > Wireless > Guest / More AP
LABEL
#
Status
SSID
Security
Guest WLAN
Modify
Chapter 7 Wireless
DESCRIPTION
Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Group Key Update Timer is the rate at which the RADIUS server sends a new group
key out to all clients.
DESCRIPTION
This is the index number of the entry.
This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active.
A gray bulb signifies that this SSID is not active.
An SSID profile is the set of parameters relating to one of the VMG's BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the wireless
client utility.
This field indicates the security mode of the SSID profile.
This displays if the guest WLAN function has been enabled for this WLAN.
If Home Guest displays, clients can connect to each other directly.
If External Guest displays, clients are blocked from connecting to each other directly.
N/A displays if guest WLAN is disabled.
Click the Edit icon to configure the SSID profile.
VMG5313-B10A/-B30A Series User's Guide
114