Automatic Vlan Learning; Ingress Vlan Security; Vlan Cli Commands - Avaya P334T-ML Installation And Configuration Manual

Chapter 11 Avaya P330 Layer 2 Features

Automatic VLAN Learning

The Avaya P330-ML learns the VLANs automatically from traffic received on ports
in "bind-to-all" mode. The maximum number of VLANs, 252, includes these
dynamically learned VLANs and any VLANs you added manually.
When the VLAN list for the switch is full, no further dynamic learning or manual
VLAN configuration will be possible until the dynamically learned VLANs are
deleted from the table. This is accomplished with the clear dynamic-vlans CLI
command.

Ingress VLAN Security

When a VLAN-tagged packet arrives at a port, only the packets with the VLAN tag
corresponding to the VLANs which are configured on the port will be accepted.
Packets with other VLAN tags will be dropped.

VLAN CLI Commands

The following table contains a list of the CLI commands for the VLAN feature. The
rules of syntax and output examples are all set out in detail in the Reference Guide.
In order to...
Assign the Port VLAN ID (PVID)
Define the port binding method
Define a static VLAN for a port
Configure the tagging mode of a
port
Create VLANs
Display the port VLAN binding
mode settings
Display VLAN tagging information
of the ports, port binding mode,
port VLAN ID and the allowed
VLANs on a port
Display the VLANs configured in
the switch.
Clear VLAN entries
84
Use the following command...
set port vlan
set port vlan-binding-mode
set port static-vlan
set trunk
set vlan
show port vlan-binding-mode
show trunk
show vlan
clear vlan
Avaya P334T-ML User's Guide