Show Flow Interface - Cisco Nexus 7000 Series Reference Manual

Show Commands

show flow interface

To display the Flexible NetFlow configuration and status for an interface, use the show flow interface
command.
Syntax Description interface-type number
Defaults
Information for the Flexible NetFlow accounting configuration on the interface is displayed.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show flow interface command.
This command does not require a license.
Examples This example shows how to display the Flexible NetFlow accounting configuration on interface Ethernet
0/0 and 0/1:
switch# show flow interface ethernet 1/0
Interface Ethernet1/0
FNF:
switch# show flow interface ethernet 0/0
Interface Ethernet0/0
FNF:
OL-25806-03
show flow interface [interface-type number]
(Optional) Type of interface that you want to view Flexible NetFlow
accounting configuration information on.
Modification
This command was introduced.
monitor: NFC-DC-PHOENIX
direction: Output
traffic(ip): on
monitor: FLOW-MONITOR-1
direction: Input
traffic(ip): sampler SAMPLER-2#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show flow interface
479