Service Ingress Qos Policy - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Basic Configurations

Service Ingress QoS Policy

To create an service ingress policy, define the following:
•
•
•
•
•
•
•
The following displays an service ingress policy configuration:
A:ALA-7>config>qos>sap-ingress# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-7>config>qos>sap-ingress#
Page 244
A policy ID value. The system will not dynamically assign a value.
Include a description. The description provides a brief overview of policy features.
Specify num-qos-classifiers parameter. The default value is 2.
Specify a default forwarding class for the policy. All packets received on an ingress SAP
using this ingress QoS policy will be classified to the default forwarding class.
Define forwarding class parameters.
→ Modify the unicast-meter default value to override the default unicast forwarding type
meter mapping for fc fc-name.
→ Modify the multicast-meter default value to override the default multicast
forwarding type meters mapping for fc fc-name.
→ Modify the unknown-meter default value to override the default unknown unicast
forwarding type meter mapping for fc fc-name.
→ Modify the broadcast-meter default value to override the default broadcast
forwarding type meter mapping for fc fc-name.
Specify IPv4/IPv6 or MAC criteria. You can define IPv4/IPv6 and MAC-based SAP
ingress policies to select the appropriate ingress meter and corresponding forwarding class
for matched traffic.
A SAP ingress policy is created with a template scope. The scope can be modified to
exclusive for a special one-time use policy. Otherwise, the template scope enables the
policy to be applied to multiple SAPs.
sap-ingress 100 create
description "Used on VPN sap"
7210 SAS M OS Quality of Service Guide