Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 387

Slope Policy QoS Commands
slope-policy
Syntax [no] slope-policy name
Context config>qos
This command enables the context to configure a QoS slope policy.
Description
slope-policy "default"
Default
name — The name of the slope policy.
Parameters
Values
7210 SAS M OS Quality of Service Guide
Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Operational Commands
Page 411