Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 52

QoS Overview
Table 22: MAC Match Ethernet Frame Types
Frame Format
802.3
Ethernet-II
Table 24
Table 23: MAC Match Criteria Frame Type Dependencies
Frame Format
802.3
ethernet-II
Service ingress QoS policy ID 1 is reserved for the default service ingress policy. The default
policy cannot be deleted or changed.
The default service ingress policy is implicitly applied to all SAPs which do not explicitly have
another service ingress policy assigned. The characteristics of the default policy are listed in
Table 25.
Table 24: Default Service Ingress Policy ID 1 Definition
Characteristic
Meters Meter 1
Page 52
IEEE 802.3 Ethernet frame. Only the source MAC, destination MAC and
IEEE 802.1p value are compared for match criteria.
Ethernet type II frame where the 802.3 length field is used as an Ethernet
type (Etype) value. Etype values are two byte values greater than 0x5FF
(1535 decimal).
lists the criteria that can be matched for the various MAC frame types.
Source MAC
Yes
Yes
Item
1 (one) meter all unicast traffic:
• Forward Class: best-effort (be)
• CIR = 0
• PIR = max (4000000 kbps in case of a LAG with four member
ports)
• MBS, CBS = default (values derived from applicable policy)
Description
Dest MAC IEEE 802.1p Value
Yes
Yes
Definition
7210 SAS M OS Quality of Service Guide
Etype Value
Yes No
Yes Yes