Table 42: Network Queue Labels And Descriptions - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Show Commands
network-queue
Syntax network-queue [network-queue-policy-name] [detail]
This command displays network queue policy information.
Description
Context show>qos
network-queue-policy-name — The name of the network queue policy.
Parameters
Values
detail — Includes each queue's rates and adaptation-rule and & cbs details. It also shows FC to queue
mapping details.
Policy
Description
Associations
Queue
CIR
PIR
CBS
FC
*A:card-1# show qos network-queue nq1
===============================================================================
QoS Network Queue Policy
-------------------------------------------------------------------------------
Network Queue Policy (nq1)
-------------------------------------------------------------------------------
Policy
Accounting
-------------------------------------------------------------------------------
7210 SAS M OS Quality of Service Guide
Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.

Table 42: Network Queue Labels and Descriptions

Label
The policy name that uniquely identifies the policy.
A text string that helps identify the policy's context in the config-
uration file.
Displays the physical port identifier where the network queue
policy is applied.
Displays the queue ID.
Displays the committed information rate.
Displays the peak information rate.
Displays the committed burst size.
Displays FC to queue mapping.
: nq1
: packet-based
Show Commands
Description
Page 219