Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 241

exit
mac-criteria dot1p-only
exit
exit
In the example above, assuming the policy is attached to a SAP in a VPLS service, compute the
classification entries per FC as:
FCnc = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are needed to identify these
traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as multicast
traffic type and uses the same meter.
FCh1 = 1 + 1 + 1 + 1 = 4
Since this FC uses unicast, broadcast, multicast and unknown-unicast meter, four entries are
needed to identify these traffic types explicitly.
FCef = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are needed to identify these
traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as multicast
traffic type and uses the same meter.
FCh2 = 1 + 1 + 1 + 0 = 3
7210 SAS M OS Quality of Service Guide
multicast-meter 8
entry 1 create
match dot1p 4
action fc af
exit
entry 2 create
match dot1p 5
action fc l1
exit
entry 3 create
match dot1p 6
action fc h2
exit
entry 4 create
match dot1p 3
action fc h1
exit
entry 5 create
match dot1p 2
action fc ef
exit
entry 6 create
match dot1p 7
action fc nc
exit
Service Ingress QoS Policies
Page 265