Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 280

Generic Commands
Operational Commands
copy
Syntax copy sap-ingress src-pol dst-pol [overwrite]
Context config>qos
This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
Description
The copy command is a configuration level maintenance tool used to create new policies using existing
policies. It also allows bulk modifications to an existing policy with the use of the overwrite keyword.
sap-ingress src-pol dst-pol — Indicates that the source policy ID and the destination policy ID are SAP
Parameters
ingress policy IDs. Specify the source policy ID that the copy command will attempt to copy from and
specify the destination policy ID to which the command will copy a duplicate of the policy.
Values
overwrite — Specifies to replace the existing destination policy. Everything in the existing destination
policy will be overwritten with the contents of the source policy. If overwrite is not specified, an error
will occur if the destination policy ID exists.
renum
Syntax renum
Context config>qos>sap-ingress>ip-criteria
config>qos>sap-ingress>mac-criteria
This command renumbers existing QoS policy criteria entries to properly sequence policy entries.
Description
This can be required in some cases since the 7210 SAS exits when the first match is found and executes the
actions in accordance with the accompanying action command. This requires that entries be sequenced
correctly from most to least explicit.
Parameters Default
Values
Default
Values
Page 304
1 — 65535
none
1 — 64
none
1 —64
7210 SAS M OS Quality of Service Guide