Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 84
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
Port Level Egress-Rate Command Reference
Configuration Commands
egress-rate
Syntax
egress-rate sub-rate [max-burst size-in-kbits]
no egress-rate
Context
config>port>ethernet
This command configures maximum rate and corresponding burst value for a port. The egress-rate
Description
is configured as kbps while max-burst is configured as kilo-bits while max-burst should be
between 32 and 16384 or default.
The no form of the command removes egress-rate from the port.
No egress-rate and max-burst is configured for the port.
Default
sub-rate — Specifies an integer value between 1 and 1000000 kbps and between 1 and 10000000 kbps for
Parameters
10G port.
max-burst size-in-kbits — Specifies an integer value, in kilo-bits, between 32 and 16384 or default.
Page 92
7210 SAS M OS Quality of Service Guide
Advertisement
Table of Contents
