Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 41
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
CBS value then the packets are marked as in-profile by the meter to indicate that the traffic is
complying meter configured parameters.
The operational CBS set by the system is adapted from the user configured value by using the
minimum constraint.
Maximum Burst Size
For trTCM, the maximum burst size parameter specifies the maximum burst size that can be
transmitted by the source at the PIR while complying with the PIR. If the transmitted burst is
lower than the MBS value then the packets are marked as out-profile by the meter to indicate that
the traffic is not complying with CIR, but complying with PIR.
For srTCM, the maximum burst size parameter specifies the maximum burst size that can be
transmitted by the source while not complying with the CIR. If the transmitted burst is lower than
the MBS value then the packets are marked as out-profile by the meter to indicate that the traffic is
not complying with CIR.
If the packet burst is higher than MBS then packets are marked as red are dropped.
The operational MBS set by the system is adapted from the user configured value by using the
minimum constraint.
7210 SAS M OS Quality of Service Guide
QoS Policies
Page 41
Advertisement
Table of Contents
