Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 386
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
Generic Commands
Operational Commands
copy
Syntax
copy slope-policy src-name dst-name [overwrite]
Context
config>qos
This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
Description
The copy command is a configuration level maintenance tool used to create new policies using
existing policies. It also allows bulk modifications to an existing policy with the use of the
overwrite keyword.
slope-policy — Indicates that the source policy ID and the destination policy ID are slope policy IDs.
Parameters
Specify the source policy ID that the copy command will attempt to copy from and specify the
destination policy ID to which the command will copy a duplicate of the policy.
overwrite —
destination policy will be overwritten with the contents of the source policy. If overwrite is not
specified, an error will occur if the destination policy ID exists.
ALA-7>config>qos# copy slope-policy default sp1
MINOR: CLI Destination "sp1" exists - use {overwrite}.
ALA-7>config>qos#overwrite
Page 410
Specifies to replace the existing destination policy. Everything in the existing
7210 SAS M OS Quality of Service Guide
Advertisement
Table of Contents
