Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 369

Use the following CLI syntax to configure a slope policy:
CLI Syntax: config>qos
The following displays the slope policy configuration (f:
A:ALA-7>config>qo>slope-policy# info
----------------------------------------------
non-tcp-slope
----------------------------------------------
A:ALA-7>config>qos>slope-policy#
7210 SAS M OS Quality of Service Guide
slope-policy name
description description-string
high-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
low-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
non-tcp-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
time-average-factor taf
description "slope policy SlopePolicy1"
high-slope
no shutdown
exit
low-slope
no shutdown
exit
no shutdown
exit
Slope QoS Policies
Page 393