Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 254

Basic Configurations
Since this FC uses unicast, broadcast and multicast meter, three entries are needed to identify these
traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as multicast
traffic type and uses the same meter.
Using the equation, calculate the total classification entries used by this policy, as follows
TC = (0 * 0)nc + (0 * 0)h1 + (0 * 0)ef + (0 * 0)h2 + (0 * 0)l1 + (3 * 2)af + (0 * 0)l2 + (1 *
3)be = 9
The number of meters used in this policy = 4.
Hence, in this example
If the same policy were to be used for a SAP in an Epipe service, then since all traffic is classified
to a unicast traffic type and since only unicast meters are used, the following:
FCnc = 0 + 0 + 0 + 0 = 0
FCh1 = 0 + 0 + 0 + 0 = 0
FCef = 0 + 0 + 0 + 0 = 0
FCh2 = 0 + 0 + 0 + 0 = 0
FCl1 = 0 + 0 + 0 + 0 = 0
FCaf = 1 + 0 + 0 + 0 = 1
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 0 + 0 = 1
Using the equation, calculate the total classification entries used by this policy, as follows:
(0 * 0)nc + (0 * 0)h1 + (0 * 0)ef + (0 * 0)h2 + (0 * 0)l1 + (3 * 1)af + (0 * 0)l2 + (1 * 1)be = 4
The number of meters used in this policy = 2.
Page 278
num-qos-classifiers 16
7210 SAS M OS Quality of Service Guide
is used (i.e. maximum of (9, (2 * 4))).