Remove A Policy From The Qos Configuration; Copying And Overwriting Network Policies - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Service Management Tasks

Remove a Policy from the QoS Configuration

To delete a network policy, enter the following commands:
CLI Syntax: config>qos# no network network-policy-id

Copying and Overwriting Network Policies

You can copy an existing network policy to a new policy ID value or overwrite an existing policy
ID. The
exists.
Note: In "no ldp-local-fc-enable" mode, when an ip-interface qos policy is copied, a new mpls-
lsp-exp-profile-map is created with the id same as dest-policy id and the mpls-lsp-exp-profile of
the dest-policy points to it. In "ldp-local-fc-enable" mode, when an ip-interface qos policy is
copied, the mpls-lsp-exp-profile of the dest-policy points to the mpls-lsp-exp-profile-map pointed
to by the source-policy.
CLI Syntax: config>qos# copy network source-policy-id dest-policy-id
[overwrite]
The following output displays the copied policies:
A:ALA-12>config>qos# info detail
---------------------------------------------
...
...
...
...
---------------------------------------------
A:ALA-12>config>qos#
Page 128
option must be specified or an error occurs if the destination policy ID
overwrite
network 1 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
network 600 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
network 700 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
7210 SAS M OS Quality of Service Guide