Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 282

Service Ingress QoS Policy Commands
scope
scope {exclusive | template}
Syntax
no scope
Context config>qos>sap-ingress policy-id
This command configures the Service Ingress QoS policy scope as exclusive or template.
Description
The no form of this command sets the scope of the policy to the default of template.
template
Default
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one SAP.
Parameters
If a policy with an exclusive scope is assigned to a second SAP an error message is generated. If the
policy is removed from the exclusive SAP, it will become available for assignment to another exclusive
SAP.
template — When the scope of a policy is defined as template, the policy can be applied to multiple SAPs
on the router.
Default QoS policies are configured with template scopes. An error is generated when the template
scope parameter to exclusive scope on default policies is modified.
default-fc
Syntax default-fc fc
Context config>qos>sap-ingress
This command configures the default forwarding class for the policy. In the event that an ingress packet does
Description
not match a higher priority (more explicit) classification command, the default forwarding class will be
associated with the packet. Unless overridden by an explicit forwarding class classification rule, all packets
received on an ingress SAP using this ingress QoS policy will be classified to the default forwarding class.
The default forwarding class is best effort (be). The default-fc settings are displayed in the show
configuration and save output regardless of inclusion of the detail keyword.
be
Context
fc — Specify the forwarding class name for the queue. The value given for fc must be one of the predefined
Parameters
forwarding classes in the system.
Values
Page 306
be | l2 | af | l1 | h2 | ef | h1 | nc
7210 SAS M OS Quality of Service Guide