Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 289

Service Ingress QoS Policy Entry Commands
action
Syntax action [fc fc-name]
no action
Context config>qos>sap-ingress>ip-criteria>entry
config>qos>sap-ingress>mac-criteria>entry
This mandatory command associates the forwarding class with specific IP or MAC criteria entry ID. The
Description
action command supports setting the forwarding class parameter. Packets that meet all match criteria within
the entry have their forwarding class overridden based on the parameters included in the action parameters.
The action command must be executed for the match criteria to be added to the active list of entries.
Each time action is executed on a specific entry ID, the previous entered values for fc fc-name is overridden
with the newly defined parameters.
The no form of the command removes the entry from the active entry list. Removing an entry on a policy
immediately removes the entry from all SAPs using the policy. All previous parameters for the action is lost.
Action specified by the default-fc.
Default
fc fc-name — The value given for fc fc-name must be one of the predefined forwarding classes in the
Parameters
system. Specifying the fc fc-name is required. When a packet matches the rule, the forwarding class is
only overridden when the fc fc-name parameter is defined on the rule. If the packet matches and the
forwarding class is not explicitly defined in the rule, the forwarding class is inherited based on previous
rule matches.
Values
entry
Syntax [no] entry entry-id [create]
Context config>qos>sap-ingress>ip-criteria
config>qos>sap-ingress>mac-criteria
This command is used to create or edit an IP or MAC criteria entry for the policy. Multiple entries can be
Description
created using unique entry-id numbers.
The list of flow criteria is evaluated in a top down fashion with the lowest entry ID at the top and the highest
entry ID at the bottom. If the defined match criteria for an entry within the list matches the information in the
egress packet, the system stops matching the packet against the list and performs the matching entries
reclassification actions. If none of the entries match the packet, the IP flow reclassification list has no effect
on the packet.
An entry is not populated in the list unless the action command is executed for the entry. An entry that is not
populated in the list has no effect on egress packets. If the action command is executed without any explicit
7210 SAS M OS Quality of Service Guide
be|l2|af|l1|h2|ef|h1|nc
Operational Commands
Page 313