Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 253

Example 8
sap-ingress 10 create
num-qos-classifiers16
meter 1 create
exit
meter 11 multipoint create
exit
meter 3 create
exit
meter 4 create
exit
fc be create
exit
fc af create
exit
default-fc be
mac-criteria dot1p-only
entry 1 create
exit
exit
match entry 2
exit
match entry 3
exit
exit
In the example above, assuming the policy is attached to a SAP in a VPLS service, the following
number of classification entries per FC:
FCnc = 0 + 0 + 0 + 0 = 0
FCh1 = 0 + 0 + 0 + 0 = 0
FCef = 0 + 0 + 0 + 0 = 0
FCh2 = 0 + 0 + 0 + 0 = 0
FCl1 = 0 + 0 + 0 + 0 = 0
FCaf = 1 + 0 + 1 + 0 = 2
Since this FC uses unicast meter, an entry is needed to identify these traffic types explicitly.
Another entry is needed to classify broadcast, multicast and unknown-unicast traffic type to the
same FC and use the default meter #11.
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 1 + 1 + 0 = 3
7210 SAS M OS Quality of Service Guide
meter 1
broadcast-meter 11
mulitcast-meter 4
meter 3
match dot1p 7 7
action fc af
dot1p 7 fc af
dot1p 5 fc af
dot1p 3 fc af
Service Ingress QoS Policies
Page 277