Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 164

Network Egress QoS Policy Forwarding Class Commands
dot1p-out-profile
Syntax dot1p-out-profile dot1p-priority
no dot1p-out-profile
Context config>qos>network>egress>fc fc-name
This command specifies dot1p out-profile mappings.
Description
The no form of the command reverts to the default out-profile dot1p-priority setting for policy-id
1.
dot1p-priority — This value is a required parameter that specifies the unique IEEE 802.1P value that will
Parameters
match the dot1p rule. If the command is executed multiple times with the same dot1p-value, the
previous forwarding class and enqueuing priority is completely overridden by the new parameters or
defined to be inherited when a forwarding class or enqueuing priority parameter is missing.
A maximum of eight dot1p rules are allowed on a single policy.
Values
dscp-in-profile
Syntax dscp-in-profile dscp-name
no dscp-in-profile
Context config>qos>network policy-id>egress>fc fc-name
This command specifies the in-profile DSCP name for the forwarding class. The corresponding
Description
DSCP value will be used for all IP packets requiring marking the egress on this forwarding class
queue that are in profile.
When multiple DSCP names are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default in-profile dscp-name setting for policy-
id 1.
dscp-name — System- or user-defined, case-sensitive dscp-name.
Parameters
Default
Values
Page 172
0 — 7
none
Any defined system- or user-defined dscp-name
7210 SAS M OS Quality of Service Guide