Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 169

Table 38: Show QoS Network Output Fields (Continued)
Accounting
Profile policy
Local FC
Global Prof
EXP Bit Mapping:
Out-of-Profile
In-Profile
Interface
IP Addr
Port-Id
A:qos1# show qos network
=========================================================================
Network Policies
=========================================================================
Policy-Id
-------------------------------------------------------------------------
1
2
=========================================================================
A:qos1#
*A:ALA# show qos network 1 detail
===============================================================================
QoS Network Policy
===============================================================================
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id
Forward Class
Attach Mode
Scope
Accounting
Description
7210 SAS M OS Quality of Service Guide
Label
Packet-based —
this policy do not account for packet framing overheads (such as
Ethernet the Inter Frame Gap (IFG) and the preamble), while
accounting for the bandwidth to be used by this flow.
Frame-based —
policy account for the packet framing overheads (such as for
Ethernet the IFG and preamble), while accounting the band-
width to be used by the flow.
Displays the profile policy ID.
Displays if ldp-local-fc-enable is enabled or disabled
Displays the global profile policy ID for LDP packets.
Displays the EXP value used for out-of-profile traffic.
Displays the EXP value used for in-profile traffic.
Displays the interface name.
Displays the interface IP address.
Specifies the physical port identifier that associates the interface.
Remark LerUseDscp Description
False False
False False
: 1
: be
: l2
: Template
: packet-based
: Default network-port QoS policy.
Description
Specifies that the meters associated with
Specifies that the meters associated with this
Default network-port QoS policy.
Default network QoS policy.
Remark : False
Profile : Out
Config Mode : l2+mpls
Policy Type : port
Show Commands
Page 177