Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 112

Basic Configurations
•
Use the following CLI syntax to create a network QoS policy (for 7210 SAS M in network mode):
Network Egress Parameters
CLI Syntax: config>qos#
Use the following CLI syntax to create a network QoS policy for 7210 SAS M in access uplink
mode:
CLI Syntax: config>qos#
Page 120
→ Forwarding class criteria — The forwarding class name represents an egress queue.
Specify forwarding class criteria to define the marking criteria of packets flowing
through it.
→ Dot1p — The Dot1p value is used for all packets requiring marking that egress on this
forwarding class queue that are in or out of profile.
Ingress criteria — Specifies Dot1p to forwarding class mapping for all packets.
→ Default action — Defines the default action to be taken for packets that have an
undefined DSCP or Dot1p bits set. The default-action specifies the forwarding class to
which such packets are assigned.
→ Dot1p — Creates a mapping between the Dot1p bits of the access uplink port ingress
traffic and the forwarding class. Ingress traffic that matches the specified Dot1p bits
will be assigned to the corresponding forwarding class.
network policy-id [network-policy-type network-policy-type]
description description-string
scope {exclusive|template}
egress
remarking
fc {be|l2|af|l1|h2|ef|h1|nc}
lsp-exp-in-profile mpls-exp-value
lsp-exp-out-profile mpls-exp-value
default-action fc {fc-name} profile {in|out}
lsp-exp lsp-exp-value fc fc-name profile {in | out}
fc {fc-name}
meter {meter-id}
multicast-meter {id}
meter meter-id [multipoint]
adaptation-rule cir {closest | max | min} pir {clos-
cbs {size-in-kbits}
mbs {size-in-kbits}
mode {trtcm | srtcm}
rate cir cir-rate-in-kbps [pir pir-rate-in-kbps]
mpls-lsp-exp-profile policy-id
network policy-id [network-policy-type network-policy-type]
description description-string
est | max | min}
7210 SAS M OS Quality of Service Guide