Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual page 335

dscp-in-profile
Syntax dscp-in-profile dscp-name
no dscp-in-profile
Context config>qos>access-egress>fc
This command specifies the in-profile DSCP name for the forwarding class. The corresponding
Description
DSCP value will be used for all IP packets requiring marking the egress on this forwarding class
queue that are in profile.
When multiple DSCP names are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default in-profile dscp-name.
Parameters
dscp-name —
Values
queue
Syntax queue queue-id
Context config>qos>access-egress
This command creates the context to modify Queue parameters associated with a particular queue.
Description
The queue is identifiable by queue-id and FCs are mapped into the queues according to
Forwarding Class to Queue-ID Map, on page
The no form of this command is not supported
none
Default
queue-id — Specifies the access egress queue-id associated with an FC according to
Parameters
Class to Queue-ID Map, on page 82
Values
7210 SAS M OS Quality of Service Guide
Specifies the DSCP name.
be|cp1|cp2|cp3|cp4|cp5|cp6|cp7|cs1|cp9|af11|cp11|
af12|cp13|af13|cp15|cs2|cp17|af21|cp19|af22|cp21|
af23|cp23|cs3|cp25|af31|cp27|af32|cp29|af33|cp31|cs4|
cp33|af41|cp35|af42|cp37|af43|cp39|cs5|cp41|cp42|
cp43|cp44|cp45|ef|cp47|nc1|cp49|cp50|cp51|cp52|cp53|
cp54|cp55|nc2|cp57|cp58|cp59|cp60|cp61|cp62|cp63
1 — 8
82.
.
Table 32,
Table 32, Forwarding
Page 359