Vlan Commands; Vlan Database; Vlan - Planet WGSD-1022 User Manual

Current privilege level is 15

5.27 VLAN Commands

5.27.1 vlan database

The vlan database global configuration command enters the VLAN configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
Console (config)# vlan database
Console (config-vlan)#

5.27.2 vlan

Use the vlan interface configuration (VLAN) command to create a VLAN. To delete a VLAN, use the no form of this command.
Syntax
vlan {vlan-range}
no vlan {vlan-range}
vlan-range — A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN IDs separated by commas
(without spaces); use a hyphen to designate a range of IDs. (Range: 2 - 4063)
User's Manual of WGSD-1022/WGSD-8000
- 344 –