Username; Show Users Accounts - Planet WGSD-1022 User Manual

5.3.10 username

The username global configuration command establishes a username-based authentication system. To remove a user name
use the no form of this command.
Syntax
username name [password password] [privilege level] [encrypted]
no username
name — The name of the user.
password — The authentication password for the user, from 1 to 159 characters in length.
level — The user level (Range: 1 -15).
encrypted — Encrypted password entered, copied from another device configuration.
Default Configuration
The default privilege level is 1.
Command Mode
Global Configuration mode
User Guidelines
Up to 30 users can be defined on the device.
Example
The following example configures user "bob" with the password "lee" and user level 15 to the system.
console (config)# username bob password lee level 15

5.3.11 show users accounts

The show users accounts privileged EXEC command displays information about the local user database.
Syntax
show users accounts
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
User's Manual of WGSD-1022/WGSD-8000
- 168 –