Clear Arp-Cache; Show Arp - Planet WGSD-1022 User Manual

Command Mode
Global Configuration mode
User Guidelines
It Is recommended not to set the timeout value to less than 3600.
Note:
The ARP entry is deleted between the period of the "timeout value" and twice the "timeout value". For example, if the timeout
value is 20 seconds, the ARP value is deleted during the period of 20 to 40 seconds.
Example
The following example configures ARP timeout to 12000 seconds.
Console (config)# arp timeout 12000

5.10.7 clear arp-cache

The clear arp-cache privileged EXEC command deletes all dynamic entries from the ARP cache.
Syntax
clear arp-cache
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example deletes all dynamic entries from the ARP cache.
Console# clear arp-cache

5.10.8 show arp

The show arp privileged EXEC command displays entries in the ARP table.
User's Manual of WGSD-1022/WGSD-8000
- 235 –