Sntp Unicast Client Poll - Planet WGSD-1022 User Manual

User's Manual of WGSD-1022/WGSD-8000
Syntax
sntp unicast client enable
no sntp unicast client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept Network
Time Protocol (NTP) traffic from servers.
console (config)# sntp unicast client enable

5.5.13 sntp unicast client poll

The sntp unicast client poll global configuration command enables polling for the Simple Network Time Protocol (SNTP)
predefined unicast clients. To disable the polling for SNTP client, use the no form of this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration mode
User Guidelines
Polling time is determined by the sntp client poll timer global configuration command.
- 191 –