Table of Contents
Advertisement
is displayed in the script format, which can be used to configure another switch with same configuration.
▫
Format
show running-config
▫
Mode Privileged EXEC
7.1.10 show sysinfo
This command displays switch information.
▫
Format
show sysinfo
▫
Mode
Privileged EXEC
▫
Switch Description - Text used to identify this switch.
▫
System Name - Name used to identify the switch.
▫
System Location - Text used to identify the location of the switch. May be up to 31 alpha-numeric
characters. The factory default is blank.
▫
System Contact - Text used to identify a contact person for this switch. May be up to 31
alphanumeric characters. The factory default is blank.
▫
System ObjectID - The base object ID for the switch's enterprise MIB.
▫
System Up Time - The time in days, hours and minutes since the last switch reboot.
▫
MIBs Supported - A list of MIBs supported by this agent.
7.1.11 snmp-server
This command sets the name and the physical location of the switch, and the organization responsible
for the network.The range for name, location and contact is from 1 to 31 alphanumeric characters.
▫
Default
None
▫
Format
snmp-server {sysname <name> | location <loc> | contact <con>}
▫
Mode
Global Config
7.2 Management VLAN Commands
7.2.1 network mgmt_vlan
This command configures the Management VLAN ID.
▫
Default
1
▫
Format
network mgmt_vlan <1-4094>
▫
Mode
Privileged EXEC
7.3 Dot1P Commands
7.3.1 classofservice dot1pmapping
This command maps an 802.1p priority to an internal traffic class for a device when in 'Global Config'
mode. The number of available traffic classes may vary with the platform. Userpriority and trafficclass can
both be the range from 0-7. The command is only available on platforms that support priority to traffic
Advertisement
Table of Contents
