Vlan Configuration - Planet WGSD-1022 User Manual

The page contains the following fields:
• LACP System
Priority
• Port
• LACP Port Priority
• LACP Timeout
• Admin Key

4.4 VLAN Configuration

A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so
only members of the VLAN receive traffic from the same VLAN members. Basically, creating a VLAN from a switch is logically
equivalent of reconnecting a group of network devices to another Layer 2 switch. However, all the network devices are still plug
into the same switch physically.
The WGSD-Switch supports 802.1Q (tagged-based) and GVRP Dynamic VLAN setting in web management page. In the default
configuration, VLAN support is "802.1Q".
IEEE 802.1Q VLANs
Figure 4-9 LACP configuration screen
Indicates the global LACP priority value. The possible range is 1- 65535 and the
default value is 1.
Set the port number which need to timeout and the priority values are assigned
Where set the LACP priority value for the port and the field range is 1-65535
Administrative LACP timeout. A short or long timeout value can be selected. Long is
the default
A channel will only be formed between ports having the same admin key, in other
words, this only applies to ports located on the same switch.
User's Manual of WGSD-1022/WGSD-8000
- 43 –