Qos Commands; Qos - Planet WGSD-1022 User Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example shows how the port copy status is displayed.
Console#show ports monitor
Source Port Destination Port
---------------- -----------------------
1/1 1/8
1/2 1/8
1/18 1/8

5.17 QoS Commands

5.17.1 qos

The qos global configuration command enables quality of service (QoS) on the device and enters QoS basic or advanced mode.
Type Status
------------ -----------
RX, TX Active
RX, TX Active
Rx Active
- 256 –
User's Manual of WGSD-1022/WGSD-8000
VLAN Tagging
-------------------
No
No
No